![]() Then check for the device name ETAS USB Remote NDIS Network Device. ![]() Open the Network and Dial-up Connections Window from the Windows Control Panel. About the solutions, you can connect the MDI to the PC USB port and power up the MDI. Part 4: Tech support: GM MDI not connectingĪnd if you connect them by USB, you need to check the MDI USB connection is detected by windows. Part 3: GM MDI connection by wired ethernet Part 2: GM MDI connection by wireless ethernet mdi connection can be discussed in the following 4 parts: If the MDI can not communicate with the MDI, you should check the cables if they are securely attached to the MDI, if the MDI has completed its power up sequence, if the connector pins are clean and if the MDI Manager software is running. If the USB is available, the MDI will connect by using the USB and if not, the MDI will connect by using wired ethernet and if neither of them is available, the MDI will connect by using wireless. Here are all solutions aimed to help fix GM MDI multiple diagnostic interface connection/communication issues (connection by usb, wireless ethernet, wired ethernet)… big thanks to all contributors and įirst, you should make sure that the MDI Manager software should be installed on the PC and the MDI must be powered up before you use it to communicate.Īlso the MDI should be configured for wired ethernet or wireless communication.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |